Cetol® 1 and Cetol® 23 Plus: The #1 rated translucent exterior finish! This two-product, three-coat, film-forming system provides a beautifully rich, durable satin finish for wood siding and logs. Eight colors are available. Cetol 1 is the translucent base coat to be used in system with Cetol 23 Plus. Its superior alkyd formulation offers excellent penetration into vertical wood surfaces and adhesion for the Cetol 23 Plus topcoat. It can also be used on its own in multiple coats, leaving a rich satiny sheen after three coats. Cetol 23 Plus is the premium, translucent topcoat for Cetol 1. The advanced alkyd resins combined with UV absorbers and trans-oxide pigments offer excellent durability and protection, leading to less frequent maintenance and more time to enjoy its beauty.
Cetol Log & Siding’s high-performance translucent two-coat satin finish creates a durable film which gives siding and logs a superb furniture-finish look while providing optimal protection. Comprised of high-solids alkyd resins and trans-oxide pigments, Log & Siding highlights the natural character and grain of the wood, and comes in seven beautiful colors.
Cetol Maintenance: This premium clear exterior finish, loaded with UV protective ingredients, can be applied only over Cetol 23 Plus or Cetol Log & Siding when the surface is in good condition. Typically with maintenance coats, pigmented products will further darken the color of the wood. With a one-coat application of Cetol Maintenance, the wood will retain the same look and depth of color, without darkening.
Cetol SRD (Siding Rails Decks) is great for decks! Its one-coat application makes it easy to use and affordable, and its penetration and matte finish mean no peeling. It can be used for a variety of applications (siding, decks, outdoor furniture, boat docks, logs), and its high-quality iron oxide pigments provide excellent UV protection and wood clarity. There are 10 natural translucent colors to choose from.
Cetol SRD Semi-Transparent Stain: Enhance the inherent beauty of wood with this tinted semi-transparent wood stain, specially formulated in a range of 60 modern designer colors, produced for maximum long term color stability. The alkyd/oil formula penetrates deep to protect against wear and moisture.
Cetol Deck Finish’s two-coat, translucent satin finish creates a protective film that gives deck surfaces a premium furniture finish while allowing the beauty of the wood grain to show through. Deck Finish creates a durable surface barrier to prevent wood from weathering. The first coat must be applied to all six sides of the wood. Four beautiful color choices are available.
Rubbol Solid DEK is an acrylic/oil formulation that features excellent penetration and adhesion over bare and previously coated surfaces. It has remarkable color retention, easy application and soap-and-water clean-up. It comes in 53 colors and has a low luster sheen.
Rubbol Siding Finish is a hybrid, alkyd/acrylic, solid color coating that bonds to bare wood or surfaces previously coated with either oil or water-based coatings, eliminating the need to prime. It has outstanding water repellency and chalk resistance, superior adhesion and flexibility for durability and minimal maintenance. 53 low sheen colors are available.
Cetol Log Décor: This translucent, waterborne, satin finish combines both color and finish in just one product! It provides color while allowing the natural beauty of the wood to shine through. The urethane-fortified acrylic formulation is non-yellowing, low odor, scratch resistant and easy to clean.
Cetol UV Interior is a unique waterborne product designed to protect interior wood, yet leave no color or sheen on the surface. For use on light colored wood, the UV absorbers minimize yellowing and allow wood to look natural. It comes highly recommended for use in saunas.
